在建材行業中,用玻化微珠作為輕質骨料,可提高砂漿的和易流動性和自抗強度,減少材性收縮率,提高產品綜合性能,降低綜合生產成本。在輕質干混砂漿(保溫型、砌筑型、抹面型)應用中,用;⒅樘娲鷤鹘y(tǒng)的普通膨脹珍珠巖和聚苯顆粒作干混保溫砂漿輕質骨料,克服了膨脹珍珠巖吸水性大﹑易粉化,在料漿攪拌中體積收縮率大,易造成產品后期強度低和空鼓開裂等現象,同時又彌補了聚苯顆粒有機材料易燃﹑防火性能差﹑ 高溫產生有害氣體和耐老化耐候性低﹑施工中反彈性大等缺陷,提高完善了保溫砂漿的綜合性能和施工性能。
市面常見的三種無機材料對比與在干混砂漿中的應用
|
名稱
Name
|
原材料
Raw material
|
物理性能
Physical Properties
|
在砂漿中的應用
Application in Mortar
|
膨脹珍
珠巖
Expanded perlite
|
珍珠巖
Perlite
|
1. 容重輕
(60~80kg/m³)
2.吸水率極大
3.顆粒強度低
4.導熱系數小
1. Low density
2.High water absorption
3.Low particle strength
4.Low heat conductivity
|
1.不規則與毛絮狀的外形,容易在砂漿攪拌過程中產生阻力,和易性極差。
1. irregular and floccus, easy to make resistance while mixing, bad workability
2.容重輕,顆粒強度低,本身有較好的熱工性能,但在砂漿攪拌過程中容易破碎,會很大程度降低其熱工性能
2. Low density, low particle strength, good thermal property itself, but break easily while mixing, and reduce thermal property.
3.吸水率大,使得砂漿的需水量增加,破壞了砂漿的凝固周期,使得砂漿的力學性能大大降低,極易產生空鼓、開裂,嚴重影響整個保溫系統的熱工性能和耐久性。
3. High water absorption, which increase mortar water demand, degrade its mechanical property significantly, then easy to have hollowing and craze, has a strong impact on the thermal property and durability.
|
閉孔珍珠巖
Hole-close perlite
|
珍珠巖
Perlite
|
1. 容重大
(120~180kg/m³)
2.吸水率較大
3.顆粒強度較大
4.導熱系數大
1. High density
(120~180kg/m³)
2. High water absorption
3.High particle strength
4.High heat conductivity
|
1.不規則的外形,在砂漿中易產生阻力,和易性差,攪拌時間長,造成其在砂漿中不易分布均勻,容易造成應力集中,引起空鼓、開裂,大大降低了砂漿的力學性能和熱工性能,也影響到保溫層的使用壽命。
1. irregular shape makes it easy to produce resistance, low workability, long mixing time, makes it unevenly distributed in the mortar, which will easy cause stress concentration, hollowing and cracking, reduce mechanical property and thermal property greatly, also has impact on the insulation layer service life.
2.容量大,導熱系數較差,在砂漿中必須增加輕骨料摻加比列方能滿足熱工性能標準要求,輕骨料摻加量的增加必然會降低砂漿的力學性能或增加膠凝材料成本。
2. High capacity with bad heat conductivity, need to increase light aggregate to meet the thermal property requirement, but adding light aggregate will reduce mortar mechanical property and increase gelled materials cost.
3.吸水率較大,在應用過程中會出現上述膨脹珍珠巖同樣的問題,不過在各項指標上要優于膨脹珍珠巖。
3. High water absorption, will have similar problems as expanded perlite while using, but have better performance than expanded perlite.
|
膨脹;⒅
Expanded and vitrified small ball
|
松脂巖
Perlite
|
1. 容重輕(80~120kg/m³)
2.吸水率小
3.顆粒強度較大
4.導熱系數小
1. Low density
(80~120kg/m³)
2.Low water absorption
3.High particle strength
4.Low heat conductivity
|
1.球狀顆粒,表面;谏皾{攪拌工程中流動性好,和易性佳,能在短時間內攪拌均勻,降低了砂漿在干濕攪拌過程中的骨料破碎,有穩定的熱工性能與力學性能。
1. Spherical particle, surface vitrified, good fluidity while mixing, good workability, mixed evenly shortly, then reduce the aggregate broke when dry-wet mixing, good thermal property and mechanical property.
2.容量輕,導熱系數低
2. low density, light weight, low heat conductivity
3.吸水率小,很容易在砂漿中得到控制,收縮率小,不空鼓開裂,有穩定的熱工性能與力學性能,并且也相對提高了砂漿的使用壽命。
3. Low water absorption, easily controlled in mortar, low shrinkage, no hollowing and cracking, stable thermal property and mechanical property, increase the mortar service life.
|